Drives
Reviewing a Drive
Tap any drive in your Drives tab to see where you went and, with an OBD2 adapter, what your engine was doing.
The top of the page
You see the drive name (or date) and car, then Distance, Duration, and Ended. A Pending badge means it hasn't finished uploading, and its charts say Not uploaded.
Route map
Under Drive Data, the route shows only if the drive recorded GPS. Otherwise: No Route Data.
- Tap the map for full screen.
- Tap or drag along the route to see the time and sensor values at that spot.
- Tap play to replay it. The speed button cycles 0.5x, 1x, 2x, 4x.
- Tap the sliders icon to choose sensors. All Sensors shows everything.
- Tap Fit Route to snap back.
The Heatmap menu colors the route by speed, RPM, throttle, engine load, or coolant temperature, when recorded. It goes blue to green to orange as values climb. None turns it off.
Telemetry charts
Each recorded reading gets a chart with Avg, Min, and Max. Latitude and longitude are skipped since the map covers them.
On iPhone, tap a chart for full screen, Done to close.
No charts means nothing was recorded. GPS Only drives usually just have speed. See OBD2 for live engine data.
Trouble codes
If your adapter was connected, codes the drive saw show under Diagnostic Trouble Codes. Tap one for detail. The section also says when diagnostics weren't checked, so a blank list isn't misleading.
Build information
Track sessions
Track session drives add lap times and lap comparison. See Track Laps.